Filter
Top Products
9
If the antenna is obstructing your use of the keyboard you can turn it to a horizontal
position and still connect to the network. If you want to use your other PC card port
remove the GC75 whilst you insert the other card.
When GC75 isn't in use it is recommended that you store it in the protective carrier ox
provided. The unit, especially the antenna could be damaged if it remains in PC.
Installing the Software
1. Insert the GC75 Manager CD-ROM in your CD drive. After a few seconds a
Connect Console splash screen is displayed.
Note:
If the CD-ROM does not autorun, select Start Run and type D:\Setup.bat into the Run
dialog. (Where D is your CD drive.)
2. The Install Shield Wizard for Mobilink Connect Console opens; follow the
Instructions on screen. When installation is complete click Finish.
3. The Setup first installs the Sony Ericsson GC75 driver and then installs Mobilink
Connect Console 75.
4. Insert the GC75 PC Card. Make sure the GC75 is fully inserted.
5. Your PC recognizes that new hardware has been inserted and installs the
necessary driver. This process will happen twice as two hardware drivers need to
be installed. The process will take a few seconds. The New Hardware Wizard
may require you to locate a specific driver file. If this happens a dialog opens,
click Browse and select D:\Driver9x (where D is your CD drive) on a Windows 98
machine or D:\Driver2k (where D is your CD drive) on a Windows 2000/XP