Filter
Top Products
22 Create a Wireless LAN Connection
Setting Your Wireless Network Connection With WEP Security
1. Under Preferred networks, click the name of your wireless network.
2. Click Properties.
3. Select Open from the Network Authentication drop down list.
4. The key is provided for me automatically check box should be cleared.
5. Type the WEP network key in the Network key field. Your network key must exactly match the
network key of the access point. Your network key is either 5 or 13 ASCII (text) characters, or
10 or 26 hexadecimal (0-9, A-F) characters.
6. Type the key again in the Confirm network key field.
7. Click the Authentication tab and clear the Enable IEEE 802.1X authentication for this
network check box.