Sony Ericsson VPL-PX30 Projector User Manual


  Open as PDF
of 19
 
4
VPL-PX20/PX30
VPL-VW10HT
4. Data of Code
11
11
1 Start Condition
22
22
2 INDEX Header
/*-- RECEIVER INDEX --*/
/*-- SENDER INDEX --*/
/*-- Command --*/
Note: CMD1 and CMD2 are assigned with different commands for each unit. Consequently,
there is no compatibility of commands between units. For details of the commands, refer
to the respective list of commands for the units. Since there is no index function of this
unit, the receiver INDEX will be ignored even if the command is designated.
33
33
3 Sub Data Size
Note: Error when 82 to FF hex codes are included.
44
44
4 Data Size 2
Note: Error when 01 to FF hex codes are included.
B1
B2
B3
B4
B5
PERIPHERAL INDEX
GROUP INDEX UPPER BYTE
GROUP INDEX LOWER BYTE
DEVICE INDEX UPPER BYTE
DEVICE INDEX LOWER BYTE
01
00
01
00
01
01: Projector
Group Index = 0001 hex
Device Index = 0001 hex
B6
B7
B8
B9
B10
PERIPHERAL INDEX
GROUP INDEX UPPER BYTE
GROUP INDEX LOWER BYTE
DEVICE INDEX UPPER BYTE
DEVICE INDEX LOWER BYTE
03
00
01
00
01 - 63
01: Controller
Group Index = 0001 hex
Device Index = 0001 - 0063 hex
B15 Data Length 2
00 0: Fixed
B14 Data Length 1
02 81 (B16 + 2) hex Data Size
Bn
B0
NAME
Start Code
DATE
(hex)
A5
NOTE
Indicates the first packet
Projector All
LCD Projector All
VPL-PX20, VPL-PX30, VPL-VW10HT only
B11
B12
B13
CMD1
CMD2
CMD3
00
80
90
Refer to attached
Refer to attached
 previous next