Filter
Top Products
4
3. Default Values
3.1 Password
The default username is "user" and the default password is "user". Please
note that the username and password is case sensitive. For security and
management reasons, we recommend that you set up a new password after
you first login to the system. Once you have changed the password, it is
important that you write it down and keep this information in a safe
location. If you happen to forget the username and password, you can push
and hold the reset button for at least 5 seconds, or until all of the LEDs
flash.
Your AVRO 3001 VoIP router is now reset to the factory default settings.
By resetting the Gateway you will loose all changes you have made to date.
Any customization (i.e. your PPPoE username and password) will need to
be reentered.
3.2 Default Network Setup
LAN
Setup
IP Address 192.168.1.1
Subnet Mask 255.255.255.0
DHCP Server Enabled
DHCP IP Range 192.168.1.100 to 192.168.1.199
WAN Setup
DHCP Client Enabled
Table 3-1
3.3 Other Default settings
Fun
ction
Setti
ngs
Time Zone Eastern Standard Time
Firewall Off
UPnP Off
DDNS Off
Table 3-2