SY-5EMA+ V1.0 Quick Start Guide
18
The SOYO CD
running the following program on your Windows CD:
Win95/OSR2/Usbsupp/USBsupp.exe
Ø
After installation of windows, you will need to install the VIA drivers. Follow the
instruction below.
Click the
Enter SOYO CD
button to display the list of drivers that can be installed on your
Motherboard. The start-up program displays the drivers available for the 5EMA+ V1.0 and
the Windows version you use.
(Driver Installation Menu)
A short description of all available drivers follows:
Ø ETEQ 4in1 driver package
u ETEQ Southbridge Driver for Win 95
Windows 95 may not recognize the southbridge of your ETEQ chipset, first install these
drivers.
u ETEQ IRQ remapping utility
To make sure that IRQs are handled correctly by Windows 98, run this utility. (Run this utility
BEFORE installing any drivers)
u ETEQ AGP Drivers
The ETEQ VxD driver for Windows 95/98 must be installed to make use of your AGP card.
(Win95: Make sure that the ETEQ Southbridge drivers are installed FIRST)
Please select the driver you want to install and click OK, You will have to
restart your system after installation. Only the drivers that are relevant
to your board are displayed initially.
ETEQ 4in1 driver package
SOYO CD Xpress utility
SOYO Speedpro BusMaster Driver for win 95/98
Cancel
Display all drivers
on the SOYO CD
OK
Driver Installation