SOYO SY-5SSM Computer Hardware User Manual


 
SY-5SSM & SY-5SSM/5 Quick Start Guide
12
Hardware
Installation
Step 7. Enable/Disable the Onboard Sound (JP9)
The onboard audio features of your Motherboard are controlled by jumpers JP9
Choose the available sound options among the following table:
Sound Settings JP9
Onboard Sound: Enable short
Onboard Sound: Disable
open
Clear CMOS Data (JP5)
In some cases the CMOS memory may contain wrong data, follow the steps below to
clear CMOS memory.
1.
Clear the CMOS memory by momentarily shorting pin 2-3 on jumper JP5. This
jumper can be easily identified by its white colored cap.
2.
Then put the jumper back to 1-2 to allow writing new of data into the CMOS
memory.
CMOS Clearing Clear CMOS Data Retain CMOS Data
JP5 Setting
Short pin 2-3 for a
few seconds to
clear the CMOS
Short pin 1-2
to retain new
settings
Note: You must unplug the ATX power cable from the ATX power connector when
performing the CMOS Clear operation.
3
2
1
3
2
1