Filter
Top Products
BIOS Setup Utility SY-7IS2
53
3-1 SOYO COMBO SETUP
This Motherboard does not use any hardware jumpers to set the CPU
frequency. Instead, CPU settings are software configurable with the BIOS
[SOYO COMBO SETUP].
After the hardware installation is complete, turn the power switch on, then
press the <DEL> key during the system diagnostic checks to enter the
Award BIOS Setup program. The CMOS SETUP UTILITY will display
on screen. Then, select the [SOYO COMBO SETUP] option from the
main menu and press the <Enter> key.
CMOS Setup Utility – Copyright ( C ) 1984-2000 Award Software
Soyo Combo Feature
CPU Host/ PCI Clock/ PC133 [100/ 33 MHz]
5
CPU Clock Ratio [X 3]
Item Help
CPU L2 Cache ECC Checking [Enabled]
Auto Detect DIMM/ PCI CLK [Enabled]
Spread Spectrum [Disabled]
C.I.H. 4-WAY Protection [Enabled]
Onboard codec control [Enabled]
Quick Power On Self Test [Enabled]
System Memory Frequency [Auto]
SDRAM CAS Latency Time [3]
SDRAM Cycle Time Tras/ Trc [7/ 9]
SDRAM RAS-to-CAS Delay [3]
SDRAM RAS Precharge Time [3]
Menu Level 4
First Boot Device [Floppy]
Second Boot Device [HDD-0]
Third Boot Device [LS120]
Boot Other Device [Enabled]
AC97 Audio [Auto]
AC97 Modem [Auto]
6
áâà: Move Enter : Select + / - / PU / PD : Value F10 : Save ESC : Exit F1: General Help
F5 : Previous Values F6 : Fail – Safe Defaults F7 : Optimized Defaults
The [SOYO COMBO SETUP] menu combines the main parameters that
you need to configure, all in one menu, for a quick setup in BIOS.