Filter
Top Products
SY-7IWM-X
Quick Start Guide
9
Hardware
Installation
Step 3. Configure Memory
Your board comes with three DIMM sockets, and provides support up to 512MB main
memory using DIMM modules from 8MB to 256MB.
Memory Configuration Table
Number of
Memory Modules
DIMM 1 DIMM 2 DIMM 3
1
Double-sided/
Single-sided
Double-sided/
Single-sided
2
Double-sided/
Single-sided
Single-sided Single-sided²
RAM Type SDRAM¹
Memory Module Size (MB) 8/16/32/64/256 Mbytes
Note: 1. PC100 Compliant DIMM module is required regardless of 66 or 100
MHz FSB speed.
2. If you want to use DIMM3, DIMM2 must be used as well to let the
system work properly. Just plugging a memory module into DIMM3
with DIMM2 left empty, will make the system unstable.
Step 4. FSB For 66MHz Jumper Setting (JP2,JP3)
If the Motherboard fails to detect 66MHz FSB when using Celeron FCPGA & Celeron PPGA
CPU., Please check the CPU FSB jumper settings on the Motherboard.
FSB Setting JP2 JP3
66MHz Short pin 1-2 Short pin 1-2
Automatic Open JP2 Open JP3
1
2
3
1
2
3
1
2
3
1
2
3