Filter
Top Products
SY-7VBA133U
Quick Start Guide
17
5. This message will come up if the CMOS has been reset, try go to BIOS setup
and load setup defaults, save and exit.
Stability Issue
My system intermittently locks up, very unstable
1. Check the CPU Temp, it might be overheating. Change the CPU FAN.
2. Do not over clock your CPU.
3. Check the specification of the memory module, maybe the M/B do not support
it.
4. Go to BIOS setup and load fail safe settings. Please check if the system
performance in the BIOS setup is set to Turbo/Maximum
5. Check website for latest bios update.
6. Check website for FAQ’s regarding instability issue.
7. Change the memory module or CPU.
8. The power supply might not have enough wattage to support all the peripherals.
if your system has other peripherals connected, like CD-RW, extra HDD, etc.
disconnect them.
9. Install VIA AGP driver
My system intermittently locks up, during Windows installation
1. Go to BIOS and load “load optimized default”.
2. Check website for any BIOS update.
3. If still has the problem, remove all other add-on cards except
CPU/Memory/Video card/Hard disk. See if you can finish Windows
installation. Then put peripherals in one by one to identify which one cause the
lockup.
BIOS Issue
Where can I find the BIOS revision of my mainboard?
It will be displayed on the up-left corner on the screen during boot-up. It will show
as your board type followed by the revision number, such as kvxa_2BA1 (meaning
BIOS revision 2BA1 for the SY-K7V Dragon plus board) or 6BA+ IV_2AA2