Filter
Top Products
SY-K7VMP
Quick Start Guide
15
Installation
Step 3. Installation of Expansion Cards
The motherboard has 1 AGP slot and 5 PCI slots.
1. Read the related expansion card’s instruction document before inserting the expansion card
into the computer.
2. Press the expansion card firmly into expansion slot in the motherboard.
3. Make sure the metal contacts on the card are correctly seated in the slot.
4. Replace the screw to secure the slot bracket of the expansion card.
5. Install driver for the operating system you use.
Note: AGP cards working on 3.3V are not supported. Only AGP cards working on 1.5V
can be used in this M/B. For AGP card voltage specification, please check the AGP card
manual or contact your AGP card’s manufacturer.
Step 4. Connections to the Motherboard
This section tells how to connect internal peripherals and the power supply to the
motherboard.
The internal peripherals consist of IDE devices (HDD, CD-ROM), Floppy Disk Drive,
Chassis Fan, Front Panel Devices (Internal Speaker, Reset Button, IDE LED and power
switch), Wake-On-LAN card and other devices.
For more details on connecting internal and external peripherals to your new
SY-K7VMP motherboard, please refer to SY-K7VMP motherboard User's Manual and
Technical Reference online manual on the CD-ROM.
Connectors and Plug-ins
Serial Port 2 : COM2
Standard IrDA (Infrared Device
Header): SIRCON
Pin1 Pin2 Pin3 Pin4 Pin5 Pin6 Pin7 Pin8 Pin9 Pin10 Pin1 Pin2 Pin3 Pin4 Pin5
CD DSR RxD RTS TxD CTS DTR RI GND NC VCC NC IRRX GND IRTX
CDSPDO MIC & LED Connector J30
Pin1 Pin2 Pin1 Pin2 Pin3 Pin4 Pin5 Pin6 Pin7 Pin8
CDSPDO GND Line_Out_L AGND Line_Out_R AGND MIC IN2 AGND
LAN_LINK_LE
VCC
GAMEPORT
Pin1 Pin2 Pin3 Pin4 Pin5 Pin6 Pin7 Pin8 Pin9 Pin10 Pin11 Pin12 Pin13 Pin14 Pin15 Pin16
VCC VCC
JOY
A3
JOY
B3
JOY
A1
JOY
B1
GND
MIDI
OUT
GND
JOY
B2
JOY
A2
JOY
B4
JOY
A4
MIDI
IN
VCC NC