Filter
Top Products
BIOS Setup Utility SY-K7VTA
76
Wake Up
Events
Setting Description Note
OFF
HDD & FDD
ON When On of HDD & FDD, any
activity from one of the listed
system peripheral devices wakes up
the system.
Default
OFF Default
PCI Master
ON When On of PCI Master, any
activity from one of the listed
system peripheral devices wakes up
the system
Disabled Default
Wake up On
LAN/Ring
Enabled
An input signal on the serial Ring
Indicator (RI) line (in other words,
an incoming call on the
modem/LAN) awakens the system
from a soft off state.
Disabled The system ignores the alarm. Default
RTC Alarm
Resume
Enabled Set alarm to power on the system by
the date (1-31) or time (hh:mm:ss).
If the date is set to [0], the system
will self-power on by alarm
everyday at the set time.
ON When set to On, any event occurring
at will awaken a system which has
been powered down.
Default
Primary INTR
OFF
IRQs Activity
Monitoring
(Press Enter)
Disabled IRQ8 (RTC Alarm), IRQ9(IRQ2 Redir),
IRQ10( Reserved), IRQ11(Reserved), IRQ15
(Reserved)
Secondary IRQ3(COM2), IRQ4(COM1), IRQ5(LPT2),
IRQ6(Floppy Disk), IRQ7(LPT1),
IRQ12(PS/2 Mouse), IRQ13(Coprocessor),
IRQ14(HardDsik)