Filter
Top Products
SY-K7VTA PRO
Quick Start Guide
7
Hardware
Installation
Install the Motherboard
To perform the installation of your new
SY-K7VTA PRO
Motherboard, follow the steps
below:
Step 1. CPU Installation
Mark your CPU Frequency:
Record the working frequency of your CPU that
should be clearly marked on the CPU cover.
200MHz FSB DDR transfer on Athlon
750 MHz (100 x 7.5)
800 MHz (100 x 8.0)
850 MHz (100 x 8.5)
900 MHz
(
100 x 9.0
)
950 MHz (100 x 9.5)
1000 MHz (100 x 10.0)
1.1 GHz (100 x 11.0)
1.2 GHz (100 x 12.0)
1.3 GHz (100 x 13.0)
200MHz FSB DDR transfer on Duron
600 MHz (100 x 6.0)
650 MHz (100 x 6.5)
700 MHz (100 x 7.0)
750 MHz
(
100 x 7.5
)
800 MHz (100 x 8.0)
850 MHz (100 x 8.5)
900 MHz (100 x 9.0)
950 MHz (100 x 9.5)
266MHz Front Side Bus DDR transfer on Athlon
1 GHz (133 x 7.5) 1.13 GHz (133 x 8.5) 1.2 GHz (133 x 9.0) 1.33 GHz (133 x 10.0)
CPU Mount Procedure:
To mount the AMD
®
& Athlon/Duron
TM
processor that you
have purchased separately, follow these instructions.
1. Lift the socket handle up to a vertical position.
2. Align the blunt edge of the CPU with the matching pinhole edge on the socket.
3. Seat the processor in the socket completely and without forcing.
4. Then close the socket handle to secure the CPU in place.
Remember to connect the CPU Cooling Fan to the appropriate power
connector on the Motherboard. The fan is a key component that stabilizes the
system. It prevents the equipment from overheating and prolongs the life of
your CPU.
1
1
3
4
2