Filter
Top Products
PTJ-40
7-15-04
PTJ-40
40' 3.5mm Plug-to-Jack Extension Cable
Fits 3.5mm Mono Mini Phone Jack at one end
and 3.5mm Mono Mini Phone Plug at the other
The PTJ-40 can be used as an extension between components or devices having
a 3.5mm mono mini phone jack at one end and a 3.5mm mono mini phone
plug at the other.
A
typical application is the extension of emitter leads terminated in 3.5mm mini
phone plugs. NOTE: For best IR control performance, emitter lead extensions in
excess of 40' are not recommended.
2-Conductor
3.5mm Mini Plug
40'
(12m)
2-Conductor Black
Stranded Wire, 24 AWG
White Striped Side
is Positive (+
)
2-Conductor 3.5mm
Mono In-line Jack
PRINTER’S INSTRUCTIONS:
INSTR,INSTL,PTJ-40 • LINEAR P/N: 224881X1 • INK: BLACK • MATERIAL: 70 LB. GLOSS
WHITE COATED PAPER • SIZE: 4.250” X 5.500” FOLD TO 4.250” X 2.750” •
FOLDING: 1 FOLD HORIZONTAL, FINISH WITH LOGO SHOWING • SCALE: 1-1
224881X1 • IMAGE 2
warranty continued
LIMITED 5-YEAR WARRANTY
SpeakerCraft Inc. warrants to the original retail purchaser only that this SpeakerCraft product will be
free from defects in materials and workmanship, for a period of 5-years, provided it was purchased
from a SpeakerCraft Authorized Dealer.
Defective products must be shipped, together with proof of purchase, prepaid insured to the
SpeakerCraft Authorized Dealer from whom they were purchased, or to the SpeakerCraft factory at
the address listed on this installation instruction manual. Freight collect shipments will be refused.
It is preferable to ship this product in the original shipping container to lessen the chance of transit
damage. In any case, the risk or loss or damage in transit is to be borne by the purchaser. If upon
examination at the Factory or SpeakerCraft Authorized Dealer it is determined that the unit was
defective in materials or workmanship at any time during this warranty period, SpeakerCraft or the
SpeakerCraft Authorized Dealer will, at its option, repair or replace this product at no additional
charge, except as set forth below. If this model is no longer available and can not be repaired
effectively, SpeakerCraft, at its sole option may replace the unit with a current model of equal or
greater value. In some cases where a new model is substituted, a modification to the mounting
surface may be required. If mounting surface modification is required, SpeakerCraft assumes no