Filter
Top Products
Unbundled Dark Fiber
10/02 Version 1 Copyright 2002 Sprint Communications Company
10
Loop Orders (Continued)
Table 5 provides the appropriate location information by Route Type.
Table 5 – Route Type Information
Route Type Location Z Location A
2) Central Office to an end-user
premises located FPP (loop)
POI CLLI at the CO (CLLI Z) End-user address
3) Central Office to remote (feeder
subloop)
POI CLLI at the CO (CLLI Z) POI CLLI at the OSP
(CLLI A)
4) Remote to remote (distribution
subloop)
POI CLLI at the OSP (CLLI Z) POI CLLI at the OSP
(CLLI A)
5) Remote to an end-user premises
located FPP (distribution subloop)
POI CLLI at the OSP (CLLI Z) End-user address
Service Tab
In IRES, entries are required in the ACTL and APOT fields on the Service tab when two CLLI
codes are required (Route Types 3 and 4). When one CLLI code and one address are required
(Route Types 2 and 5), the only field requiring an entry is the ACTL field.
In addition, entries are required in the NC, NCI and SECNCI fields on the Service tab. Table 6
provides the codes for loop Route Types 2, 3, 4 and 5.
Table 6 - Codes
Route Type NC NCI SECNCI
2) Central Office to an end-user premises located FPP
(loop)
LX-- 01QBF.LLX 01FCF.X
3) Central Office to remote (feeder subloop) LX-- 01QBF.LLX 01QEF.X
4) Remote to remote (distribution subloop) LX-- 01QEF.X 01QEF.X
5) Remote to an end-user premises located FPP
(distribution subloop)
LX-- 01QEF.X 01FCF.X
Figure 8 illustrates the required entries described above. The remaining fields highlighted on the
Service tab should be completed with standard entries.