Filter
Top Products
Soundscape Mixpander
Page 44 of 59
Mixer example: the default 64 Ch Mixer
This is the default configuration loaded when you start the software for the first time. It allows
audio data received at any AES/EBU or ADAT (depending on model), or Analogue input of the
XLogic Alpha-Link to be routed through the Mixer (i.e., each successive pair of physical inputs of
the Alpha-Link is connected to at least one of the first 32 stereo mixer columns). This means that
you will hear something when you install your SSL Soundscape Mixpander in your studio for the
first time with sound sources connected to any of these inputs. The output signals from these 32
stereo mixer columns are sent to the “Master L/R” mixer column (column number 33) via BUS 1-2.
The summed signal from mixer column 33 is then output via the first digital (AES/EBU or ADAT)
and analogue output pair of the XLogic Alpha-Link.
IMPORTANT: The MADI inputs and outputs are not used in this mixer configuration.
NOTE:Iftheinputpeakmeterindicatesnosignal,ormaximumlevelallthetime,theMasterClock
settingsareprobablyincorrect.PleasemodifythemaccordingtotheSettingsMenuchapterofthe
SSLSoundscapeMixerReferenceGuide
First, please note that you can switch the whole SSL Soundscape Mixer window between Small
Column Size and Full Column Size view by pressing [Q] or [X] respectively, or by clicking Small
Column Size or Full Column Size under the View menu: