Filter
Top Products
Desktop System Controller Hub with Advanced, 8051µC-Based Auto Fan Control
SMSC SCH5617C 3 Revision 0.7 (12-09-08)
PRODUCT PREVIEW
General Description
The SCH5617C is a 3.3V PC 2001 compliant Super I/O controller with an LPC interface. All legacy
drivers used for Super I/O components are supported making this interface transparent to the
supporting software. The LPC bus also supports power management, such as wake-up and sleep
modes.
The SCH5617C provides temperature monitoring with auto fan control. The temperature monitor is
capable of monitoring two external diodes, one internal ambient temperature sensor or retrieving
temperatures from external processors that implement the PECI Interface. This includes support for
the PECI REQUEST# and PECI AVAILABLE signals that are used to assure correct operation of PECI
when processors enter the C3/C4 sleep states. This device offers programmable automatic fan control
support based on one or more of these measured temperatures. There are three pulse width
modulation (PWM) outputs with
high frequency support as well as three fan tachometer inputs. In
addition, there is support for a PROCHOT_IN# pin that may be used to generate an interrupt, adjust
the programmed temperature limits in the auto fan control logic, or force the PWM outputs on full.
There is also a separate PROCHOT_OUT output pin.
The GLUE Logic includes various power management logic including generation of RSMRST# and
Power OK signal generation. There are also four LEDs to indicate power status and hard drive activity.
Also included is SMBus Isolation logic, which can be used to isolate SMBus signals during power down
modes.
The part provides 45 General Purpose I/O control pins, which offer flexibility to the system designer.
There are 21 Scratchpad read/write runtime registers for custom use.
The SCH5617C incorporates the following Super I/O components: a parallel port that is compatible
with IBM PC/AT architecture, as well as the IEEE 1284 EPP and ECP; two serial ports that are
16C550A UART compatible; a keyboard/mouse controller that uses an 8042 micro controller; two
floppy controllers, which use SMSC's true CMOS 765B core; one infrared port that is IrDA 1.0
compliant. The true CMOS 765B core provides 100% compatibility with IBM PC/XT and PC/AT
architectures and is software and register compatible with SMSC's proprietary 82077AA core. The part
also provides a low battery warning circuit.
The SCH5617C is ACPI 1.0b/2.0 compatible supports multiple low power-down modes. It incorporates
sophisticated power control circuitry (PCC), which includes keyboard and mouse wake-up events.
The SCH5617C supports the ISA Plug-and-Play Standard register set (Version 1.0a). The I/O Address,
DMA Channel and hardware IRQ of each logical device in the SCH5617C may be reprogrammed
through the internal configuration registers. There are up to 480 (960 for Standard Mode Parallel
Port)
I/O address location options, a Serialized IRQ interface, and four DMA channels.