SMSC USB2502 Switch User Manual


 
SMSC USB2502 DATASHEET Revision 2.3 (08-27-07)
Datasheet
PRODUCT FEATURES
USB2502
2-Port USB 2.0 Hub
Controller
Integrated USB 2.0 Compatible 2-Port Hub
High-Speed (480Mbits/s), Full-Speed (12Mbits/s) and
Low-Speed (1.5Mbits/s) compatible
Full power management with ganged power control
Detects Bus-Power/Self-Power source and changes
mode automatically
Complete USB Specification 2.0 Compatibility
Includes USB 2.0 Transceivers
VID/PID/DID, and Port Configuration for Hub via:
Single Serial I
2
C EEPROM
SMBus Slave Port
Default VID/PID/DID, allows functionality when
configuration EEPROM is absent
Hardware Strapping options allow for configuration
without an external EEPROM or SMBus Host
On-Board 24MHz Crystal Driver Circuit or 24 MHz
external clock driver
Internal PLL for 480MHz USB 2.0 Sampling
Internal 1.8V Linear Voltage Regulator
Integrated USB termination and Pull-up/Pull-down
resistors
Internal Short Circuit protection of USB differential
signal pins
Basic single-color LED support
1.8 Volt Low Power Core Operation
3.3 Volt I/O with 5V Input Tolerance
36 Pin QFN or 48 Pin TQFP lead-free RoHS
compliant package