Filter
Top Products
44 Using the Printer with MS-DOS
❏ If none of the printers listed above is available in the application, choose
one of the following. Once again, you should choose the one that is nearest
to the top in the following list. Use User Setup Utility to select IBM
emulation (page 20).
The above two printers are shaded because they are not color printers. This
means that you will not be able to print in color if your select one of these.
Note:
You cannot print in color unless you select the name of a color printer.
❏ To print, follow the instructions given in the manual of the application you
are using. Typically, you would select the application’s PRINT command,
make any necessary changes in the window that appears (such as the
number of copies to be printed), and then press the Enter key to start
printing.
Selecting fonts in MS-DOS applications
Use the User Setup Utility to select a font when running an application under
MS-DOS. For details on the fonts that are available and how to select them, see
“LQ Font” on page 22 of this manual.
IBM ProPrinter X24E/XL24E
IBM ProPrinter X24/XL24