Filter
Top Products
Return to top of current page
Mode
ASCII Decimal Hexadecimal
Std. <ESC> <FF> 27 12
1B OC
Feeds the paper backward to the top of the current page. Ignored
when friction feed is used.
Disable paper-out detector
Mode
ASCII Decimal Hexadecimal
Both <ESC> “8” 27 56
1B 38
Causes the printer to disregard the signal sent by the paper-out
detector, enabling printing to the bottom of the paper. Overrides the
setting of EDS switch B-2,
Enable paper-out detector
Mode ASCII Decimal
Hexadecimal
Both
<ESC> “9” 27 57 1B 39
Causes the printer to stop printing before the end of the paper.
Overrides the setting of EDS switch B-2.
Set vertical tab stops
Mode ASCII Decimal
Hexadecimal
Both
<ES6 “B” nl n2 <O> 27 66 nl n2 . . . 0 1B 42 nl n2 . . . 00
Cancels all current vertical tab stops and sets new vertical tab stops -
at lines nl, n2, etc., where nl, n2, etc. are numbers between 1 and
255. A maximum of 16 vertical tab stops can be set. The tab stops
must be specified in ascending order; any violation of ascending
order terminates the tab stop list. Standard termination is by the <O>
control code. The vertical tab stops are set in terms of the current line
spacing and do not move if the line spacing is changed later.