Filter
Top Products
– 50 –
APPENDIX
0
Paper Specifications
Recommended paper-roll types:
NIPPON PAPER INDUSTRIES TF50KS-E
TF62KS-E
NEW OJI PAPER Co.,Ltd. KF-730
Many paper types are available. Please use paper that meets the following
criteria.
1. Paper type General high-sensitivity thermal paper
General high-sensitivity label paper
• If you use medium or low sensitivity paper,
run a test print to check operation. If the
printer is unable to print at 50mm/sec, set the
print speed to 25mm/sec.
2. Paper width 60mm ~ 82
-1
mm
• When using narrow paper, be sure that the
paper is at least wide enough to keep the platen
and head from touching. Never use paper that
allows the head to touch the platen.
• If the paper width is 70mm or less, do not run
the platen in reverse.
3. Paper thickness General thermal paper: 60 ~ 150µm
Label paper: Max. 160µm
4. Paper rolls Internal diameter: 25.4mm (1 inch)
Outer diameter: 115mm
Rolls must have the thermal side facing in-
wards. Never use tape or other adhesive to
fasten the trailing end of the paper to the roller.