Filter
Top Products
Instruction Manual
5
Powering the Drive Enclosure
The hard drive enclosure requires no external power supply, as it is ca-
pable of receiving enough power (5V/500mA) from the USB Bus to which
it is connected. Please ensure that both USB type A connectors are
inserted into available ports on the host computer.
LED Indicator
The hard drive enclosure offers an LED indicator, to enable you to moni-
tor drive activity. When the enclosure is powered, the LED will illuminate
and remain green. While the hard drive is being accessed, however, the
LED will change from green to red. Do not remove the enclosure from
the host computer while the LED is red, as it could damage the drive or
the enclosure, resulting in data loss.
Disconnecting the Hard Drive
Windows 98SE
The hard drive enclosure can be removed when the activity LED is
green. To do so, simply unplug the USB cable connecting the enclosure
to the host computer.
Windows ME/2000/XP
Right click on the removable storage icon, located in the task bar. 1.
2. Windows XP: When the Safely Remove Hardware message
appears, click on it with the left mouse button.
Windows ME/2000: When the Unplug or eject hardware message
appears, click on it with the left mouse button.
You will be asked to select the device you wish to disconnect. Please 3.
highlight the drive listing, and click on OK
On the screen that follows, click on 4. Stop.
Wait for the message indicating that it is now safe to remove the 5.
device. Please note: