Filter
Top Products
Instruction Manual
4
Network Connection
1. Ensure that both the IES5102 and any devices that are to be connected to it are
powered o.
2. Prepare the necessary cabling for each device that is to be attached to the IES5102.
Use the following chart as reference for cabling types:
Speed Connector
Port Speed
(Half/ Full Duplex)
Cable Type
Max.
Distance
10Base-T RJ45 10/20 Mbps
2-pair UTP/STP
Cat 5 or better
100 m
100Base-TX RJ45 100/200 Mbps
2-pair UTP/STP
Cat. 5
100 m
3. Connect your uplink (connection to an upstream network switch) to the Uplink Port,
followed by connecting your network devices to the remaining RJ45 ports using
RJ45 terminated Ethernet cabling (Cat 5 or better recommended).
4. Check to ensure that both devices are transmitting and receiving data by checking
their LED displays.