Filter
Top Products
Instruction Manual
3
5. Click Next.
6. Click Finish to complete the driver installation.
For Windows® XP/Server 2003/XP-x64/Server 2003-x64
1. Insert the Driver CD into the CD-ROM drive.
2. At the Found New Hardware Wizard, select Install the software
automatically (Recommended), then click Next.
3. If a Hardware Installation warning pops up indicating that the driver
software has not been digitally signed, click Continue Anyway, then
click Finish to complete the driver installation.
For Windows® Vista/Vista-x64
1. Insert the Driver CD into the CD-ROM drive.
2. At the Found New Hardware Wizard, select Locate and install driver
software (recommended).
3. Click Next to continue to setup.
4. The Add New Hardware Wizard will now ask you Would you like to
install this device software?. Click Install to continue.
5. Click Close once driver installation is complete.
To Verify Windows® Driver Installation
To verify that the necessary software has been installed, Click on the
Device Manager tab in System Properties, which you can be accessed
through the Control Panel or by following these steps:
1. Right-click on My Computer and select Manage.
2. In the left pane of the Computer Management window, click on Device
Manager.
You should see one PCI Express ECP Parallel Port … installed under
Ports (COM & LPT) item.