Filter
Top Products
Instruction Manual
4
When the 1. Found New Hardware Wizard appears, please click the
Cancel button to halt driver installation for the device temporarily;
the driver for this device will be installed in the next step.
Insert the Driver CD that was included with PEX100S. 2.
From the Windows desktop, click one the 3. Start button, then select Run.
In the text space provided, type X:\PCIe\LAN\setup.exe (where X 4.
denotes the letter assigned to your CD/DVD-ROM drive) and then click
OK.
Follow the on-screen instructions to complete the installation.5.
Restart Windows to complete the installation6.
Windows Vista®
Once the Windows Vista® operating system loads following hardware
installation, the PEX100S 10/100 Mbps Ethernet PCI Express Card will
be detected, launching automatic installation of the Gigabit Ethernet PCI
Express Card.
Once this is complete:
Insert the Driver CD driver bound with 10/100 Mbps Ethernet PCI
Express Card into your CD-ROM Drive.
Insert the Driver CD that was included with PEX100S. 1.
From the Windows desktop, click one the 2. Start button, then select Run.
In the text space provided, type 3. X:\PCIe\LAN\Vista\setup.exe (where
X denotes the letter assigned to your CD/DVD-ROM drive) and then
click OK.
Follow the on-screen instructions to complete the installation.4.
Restart the computer to complete the installation.5.