Filter
Top Products
Instruction Manual
6
5. Place the front panl back on by placing it over the drive bay, and sliding it into place.
6. Replace the screw using the Phillips head screw driver.
7. If using eSATA, connect the the included eSATA cable from an available eSATA port
on your computer system to the eSATA port on the enclosure.
Note: For all 4 drives to be detected by your computer when connected via eSATA.
The eSATA port on your computer system must support Port Multiplier.
OR
If using USB, connect the the included USB 3.0 cable from an available USB port on
your computer system to the USB 3.0 port on the enclosure.
8. Turn on the unit, by Pushing the Power button on the front panel.