Filter
Top Products
Instruction Manual
2
3. From the bottom attach 2 screws to secure the hard drive to the rear panel.
4. Slide the hard drive with rear panel into the metal enclosure.
5. Attach two screws. You can now attach the enclosure to a computer system via the
integrated USB cable.
NOTE: A DC power connector for an external power adapter is located under the built-
in USB cable. This would be necessary for any hard drives that cannot draw enough
power from the USB port alone.
Driver Installation
Windows 2000/XP/Vista/7, Mac OS 9.2/10.x, or Linux/Unix
No driver installation is required for these operating systems, as this enclosure is
natively supported, so the drivers are already installed.