Filter
Top Products
Instruction Manual
3
4. Slide the hard drive tray back into the enclosure and place the reawr panel bezel
over the rear panel. Fasten the two side screws for the rear panel bezel.
5. Connect the power adapter from the enclosure to an available power outlet and
then turn the enclosure on, via switch on the rear panel.
6. Connect the enclosure to the host computer system via FireWire or USB cable.
Driver Installation
Windows 2000/XP/Vista/7, Mac OS 9.2/10.x, or Linux/Unix
No driver installation is required for these operating systems, as this enclosure is
natively supported, so the drivers are already installed.
Retaining Screws