Filter
Top Products
SATA35252X
3.5” Bay to Dual 2.5” SATA HDD Adapter
Features
Holds one or two 2.5” SATA hard drives•
Occupies a single 3.5” drive slot•
Includes 4-pin HDD to SATA power cable•
Installation
WARNING! Computer equipment can be severely damaged by static electricity. Be sure that you are properly
grounded before opening your computer case or touching your hard drive. StarTech.com recommends that
you wear an anti-static strap when installing any computer component. If an anti-static strap is unavailable,
discharge yourself of any static electricity build-up by touching a large grounded metal surface (such as the
computer case) for several seconds. Be sure to handle your hard drive carefully and consult your hard drive
and laptop manufacturer for details on how to remove the drive.
Single Drive Installation
Place the 2.5” hard drive on a flat, stable surface, label side down.1.
Place SATA35252X on top of the drive, such that the plastic fastening tabs are facing down, and the hard 2.
drive mounting screw holes are aligned with the appropriate holes provided by SATA35252X.
Please note the drive outline that is printed on the board - by installing the drive within this spacing, the
drive interface is allowed to overhang the indent in the board, facilitating connectivity.
Fasten SATA35252X to the drive, using the screws provided. Once the drive has been secured to 3.
Mounting
Brackets
(x6)
Board Indent
Stacking
Rails