Filter
Top Products
Instruction Manual
5
Operation
There are two ways to select the host computer you wish to broadcast to
the console: the Remote Selector, and Hotkey Mode. If you wish to use
the Remote Selector to switch between host computers, simply connect
it to the Remote Selector Input (shown on pg.3). To switch between host
computers, press the button on the remote selector, pictured below.
Hotkey Conguration
Invoking Hotkey Mode
All Hotkey operations begin by tapping the Scroll Lock key twice. The
tables on the following page describe the action that each hotkey opera-
tion performs.
Please Note: The default hotkey invocation key is the Scroll Lock key, but
the Ctrl key can also be used.
Port Selection Button