Filter
Top Products
13
computer connected to a Slave, two characters represent its port.
The first character is the port number of the Master unit (1~8) and the
second one is the port number of the Slave (1~8 or A~H). Please note
that only the Master’s ‘PC1’ ~ ‘PC8’ ports can be connected to a Slave.
EXAMPLES:
Left <CTRL> , Left <CTRL>, <7> : Selects a computer connected to
port 7 of the Master.
Left <CTRL> , Left <CTRL>, <6>, <C> : Selects a computer
connected to port C of a Slave connected to port 6 of the Master.
Auto Scan
In this mode, the KVM Switch automatically switches from one
power-on computer to the next, sequentially, in a fixed interval. During
AutoScan mode, the OSD displays the name of the selected computer.
Left <CTRL>, Left <CTRL>, <F1>
When Auto Scan detects any keyboard or mouse activity, it suspends
the scanning until the activity stops. It then resumes with the next
computer in sequence. The length of the Auto Scan interval (Scan
Rate) is adjustable. To abort Auto Scan mode, press the left <CTRL>
key twice.
NOTE: Scan Type determines whether an eye-marked computer is to
be displayed during Auto Scan.
Manual Scan enables you to manually switch back and forth between
the powered computers:
Left <CTRL>, Left <CTRL>, <F2>
Press the <UP> arrow key to select the previous computer and the
<DOWN> arrow key to select the next computer. Press any other key to
abort Manual Scan mode.
NOTE: Scan Type determines whether an eye-marked computer is to
be displayed during Auto Scan.
To adjust Scan Rate, which sets the duration before switching to the
next computer in Auto Scan:
Left <CTRL>, Left <CTRL>, <F3>