Filter
Top Products
Instruction Manual
2
Installation
PC BIOS Notice: The following BIOS setup changes are necessary for PC users but are not
required for Mac users:
1. In STANDARD CMOS, set HALT ON ERROR to ALL BUT KEYBOARD.
2. In PNP AND PCI SETUP, set PNP OS INSTALLED to YES and set the USB
IRQ to ENABLED.
Console Connections
Before installation, please ensure that all devices and computers to be connected to
the KVM Switch have been turned o.
1. Connect the monitor that will be used to the Console DVI port on the rear panel
of SV431DVIUA
2. Connect a USB keyboard and a USB mouse to any two of the Console USB ports as
shown below:
USB Device
USB Device
USB Mouse
USB Keyboard