Filter
Top Products
5
• For notebook computers: In most cases, all you need is one PS/2
male-to-male cable connected between the SV431H and your
Notebook; the Y-adapter is not necessary. However, some Notebook
computers do not follow industry-standard, please check your
Notebook user’s manual for details.
You can now turn on all devices and computers.
Note: Do use both PS/2 and USB of a PC port on the SV431H at the
same time. Only the USB port will effective if this occures.
Operations
Front Panel
• Online LED & Selected LED
When the LED turns green, the connected computer is powered-on.
When a computer is selected, its corresponding red LED illuminates.
• Pushbuttons
Each computer has a button associated with it on the front panel for
selection.
• K/M Reset
K/M Reset solves most problems developed by keyboard, mouse,
device replacement or change of configuration. Press both of the
front-panel number 1 and 2 push buttons for 2 seconds to
re-configure the whole system without turning either the SV431H or
any computer off.
• Auto Scan
Auto Scan automatically scans through computers one by one in a
fixed intervals. The SV431H provides an easy to use feature to start
Auto Scanning. You can press down both the front-panel number 3
and 4 buttons for 2 seconds to start Auto Scanning.