Filter
Top Products
24
Double OSD
images at
cascade
configuration
sImproper slave
connection procedure.
sPress push buttons 1 and 2
down for 2 seconds to activate
K/M RESET.
sRemove any possible power
supply to the Slave (unplug all
cables), before connecting it to
the Master.
OSD menu is
not at the
proper position
sOSD menu has fixed
resolution and its size
varies due to computer
VGA resolution changes.
sUse <F4>: More\Position to
select UL or UR. OSD menu
may appear near the middle of
the screen when LL or LR is
selected.
Computer can
not use serial
mouse
sLoose mouse adapter
sIncorrect mouse adapter
sSecure the mouse adapter to
computer’s COM port
sUse only the mouse adapter
comes with the unit
Can not select a
computer
connected to a
slave
sImproper Master unit
connection
sImproper slave unit
connection
sToo many levels of
slaves
sOnly Master ports PC1~PC8
can be connected to slaves.
sConnect slave CONSOLE port
to PC1~PC8 ports of the Master
sOnly one level of slave units is
allowed. Pop up OSD again to
check if Master recognizes the
slave connection. Look for
triangle mark and the number
before it.
The StarView
fails to function
occasionally.
sComputers do not supply
enough power.
sMake sure a power adapter with
minimum of 9V 500mA-output
rating is firmly connected to the
power jack.