Filter
Top Products
Instruction Manual
5
Hardware Installation
1. Once the computer has restarted connect your USB display adapter via the USB
cable to your PC.
2. The system will initiate driver and software application (screen may ash or go black
during the install).
3. Connect your display to the available video output port on the USB Display Adapter.
The USB Video Adapter is now ready for use.
USB Hub Installation (Optional)
This device includes a built-in 3-port USB 3.0 hub, enabling you to add up to 3
additional USB 3.0 devices to the same USB 3.0 port.
NOTE: If the USB display adapter is connected to a USB 2.0 host port, the hub will only
operate at USB 2.0 speeds.
1. Ensure the Hardware Installation steps have been completed. USB hub drivers will
install as part of the installation when the device is connected.
2. Connect the USB cable from your desired USB device to any of the female USB ports
on the USB Display Adapter.
3. After connecting your device(s) to the hub, follow the installation steps for your
device(s) on-screen (if any).