Filter
Top Products
Mechanical Construction
Body: Nickel-Plated Cast Zinc
Back Plate: Tinned Steel, Epoxied
F-Ports: Machined, Flat Port
Contacts: Silver-Plated Beryllium Copper,
2-Prong
Ground Screw: Nickel-Plated Steel (1)
Mounting Screws: Nickel-Plated Steel (2)
Electrical Specifications
Passband Frequency: 950-2300MHz
Satellite Input Attenuation: 1dB typ. @ 2150MHz
Satellite Input Flatness: ≤1.0dB
Noise Figure: 4.8dB
Cr
oss Polarization:
40dB typ. @ 1450MHz
Satellite Isolation: 35dB typ. @ 1450MHz
Receiver Isolation: 40dB min.
Receiver Power Input: 13/17VDC
Output Signal: 22±4kHz, 650±250 mVp-p
Port Current Consumption: 90mA
Polarity: Center Positive
Power Supply: 115±10% VAC in, 24VDC out, 1000mA out
4x8 SkySwitcher
™
Multiswitch
New Product Release
STEREN ELECTRONICS INTERNATIONAL, LLC | Ph: 800-266-3333 | Fax: 800-266-3334 | www.steren.com | Email: sales@steren.com
New Product Release Rev. 03/05. Specifications Subject to Change Without Notice. ©2005 Steren Electronics International, LLC
Specifications
Ordering Information:
201-747 4x8 SkySwitcher
™ Multiswitch
Related Products
201-737 3x8 SkySwitcher
™
Multiswitch
201-758 5x8 SkySwitcher™ Multiswitch
202-044 4x4 SkySwitcher™ Multiswitch
202-054 5x4 SkySwitcher
™
Multiswitch
202-058 5x8 SkySwitcher
™
Multiswitch
202-134 3x4 SkySwitcher™ Multiswitch
202-254 5x4 SkySwitcher
™ Amplified Multiswitch
Packaging
Each satellite multiswitch is packaged individually
.
PR-019
9.6˝ (243mm)
1.1˝ (28mm)
1˝ (25.2mm)
8.6˝ (218mm)
0.4˝ (10mm)
0.8˝ (20.5mm)
0.5˝ (12.5mm)
4.3˝ (108mm)
0.4˝ (9.5mm)
5.3˝ (134mm)