Filter
Top Products
SVL-A, SVL-B, SVL-C, & SVL-D Self-Contained Material Loaders - Venturi Style 19 of 49
2-6 Electrical Connection
The operating voltage is 115 or 230 VAC, AC, PE, 50/60 Hz. Special voltages
available by request.
The connected load is approximately 2 Watts.
The connection is made using a main connector. A separate protection of the
socket is not necessary.
Connect the plug of the sensor cable to the control unit.
Plug the main connector into a corresponding socket.
Make sure all equipment is properly grounded.
WARNING! Check with the local electricity board for regulations.