Summit E-321 Printer Accessories User Manual


 
DOC-0331 Page 10 www.summitlaser.com
Lexmark E-321/E323 Toner Cartridges (Continued)
Figure 30
Figure 31
26) Carefully align and install the left end cap. Make sure the back brace fits correctly and that the alignment
pins are all in there correct position. Snap the end cap in place. See Figure’s 30 & 31
Figure 32
Figure 33
27) With the spring hook, grasp the small loop of the spring and place it on the small end cap post. See Figure
32
28) Install the three screws on the end cap. See Figure 33