Filter
Top Products
36. Install the MRS drive gear. 37. Install the keyed MRS cover. Make sure that the keyed hole
in the cover matches the keyed end of the magnet in the MRS
assembly.
38. Fill with appropriate amount of P4015 toner, install the fill
plug.
39. Hold the two sections of the cartridge together, and install
the left (Contact side) end cap. Install a screw in the waste and
supply sections to hold everything together.
UNINET IMAGING INC. • BROTHER 1240/1650 • ASSEMBLING THE TONER CARTRIDGEUNINET IMAGING INC. • BROTHER 1240/1650 • DISASSEMBLING THE TONER CARTRIDGE
HP P4014, P4015 & P4045 CARTRIDGE REMANUFACTURING INSTRUCTIONS
3232 West El Segundo Blvd., Los Angeles, California 90250 USA • Ph +1 310 280 9620 • Fx +1 310 838 7294 • techsupport@uninetimaging.com • www.uninetimaging.com
© 2008 UniNet Imaging Inc. All Trademark names are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not warrant downloaded information.
SU
MMIT