Filter
Top Products
14 Sun Enterprise 10000 DR Configuration Guide • May 2002
Remote DR Communication
In Solaris 9 domains, the domain configuration server, dcs(1M), controls DR
operations.
▼ To Troubleshoot a Connection Failure During a Solaris 9
(DR Model 3.0) Operation
1. Check the domain.
dcs(1M) must be configured in the /etc/inetd.conf file of the domain. The
following lines must be present in the file:
2. If the dcs daemon is configured in /etc/inetd.conf, kill dcs(1M) if it is
currently running, and send a HUP signal to the inetd(1M) daemon to cause it to
re-read the inetd.conf(4) configuration file:
where dcs_pid is the process ID of the dcs(1M) daemon and inetd_pid is the process
ID of the inetd(1M) daemon.
3. Check the /var/adm/messages file for possible error messages from inetd(1M)
if it is having trouble starting dcs(1M).
The dcs(1M) daemon executable file resides in the /usr/lib directory.
4. Try the DR operation again, starting from the beginning.
sun-dr stream tcp wait root /usr/lib/dcs dcs
sun-dr stream tcp6 wait root /usr/lib/dcs dcs
# kill -9 dcs_pid
# kill -HUP inetd_pid