Filter
Top Products
4 SunFastEthernet Adapter—July 1994
2. Edit the name_to_major file by adding an entry for the be device.
If the major device number for the last file entry is “n” then use” n+1” for
the be channel major device number. As shown in the example, if the last
entry is qe 104 then use be 105.
3. Copy be driver to clients root partition as follows:
then:
Speed Selection
If you receive the following messages after connecting to a 10 or 100Mbps
network then more than likely the external hub and the SunFastEthernet are
out of sync. In these instances speed selection may be done manually using the
be_speed utility as indicated in the procedure that follows:
This utility is available in the directory /usr/sbin only if patch ID 101820-01 is
installed. This patch is mandatory for the Solaris 2.3 Hardware: 5/94 release;
for the Solaris 2.3 Hardware: 8/94 release the patch is needed only if the
be_speed utility is required.
qec 103
qe 104
be 105
# cd /export/root/<client name>/kernel/drv
# cp /kernel/drv/be .
# 100 Mbps Link Up
Link Down
10 Mbps Link Up
Link Down