Filter
Top Products
3-6 Sun StorEdge FC-100 Hub Installation and Service Manual • September 1998
3.3 Removing a Hub
1. Disconnect and remove any installed fiber optic cables or GBICs (FIGURE 3-3).
2. Disconnect the AC power cord from the hub.
3. Push up on the retaining tab that secures the hub to the mounting tray
(
FIGURE 3-5).
FIGURE 3-5 Removing the Hub
4. Pull the hub back and then lift it out of the mounting slots.
Position A
Position B
Notch
Retaining tab