Filter
Top Products
Installing the Adapter 2-3
2
2.3 Booting the System
Refer to the Solaris 2.5 Handbook for SMCC Peripherals manual for detailed
instructions for the following tasks.
• To boot the system from the default boot device, use the boot -r command.
• To use the SunSwift SBus Adapter Ethernet interface as the boot device,
specify the OpenBoot™ device name with the boot command, for example:
Note – A“SUNW,hme0: Link Down - cable problem?” message means that the
Ethernet cable is disconnected either at the RJ-45 connector or at the hub.
ok boot -r /iommu@f,e0000000/sbus@f,e0001000/SUNW,hme@0,8c00000