Filter
Top Products
2 Sun Blade T6300 Server Module Installation Guide • April 2007
Physical Specifications
The Sun Blade T6300 server module is approximately 12.6 x 19.5 inches in a 1U form
factor. The server module plugs in to a 10U chassis. The chassis provides cooling
through six redundant fans and 12V power to each module. In addition to 12V
power, the chassis provides 3.3 VAUX to each module to power the local FRU ID
EEPROM. This power enables the chassis management module (CMM) to query
each module slot prior to 12V and fan application to validate that there is sufficient
power and cooling to support the number and type of modules installed in the
chassis.
Environmental Requirements
TABLE 1-1 includes the environmental requirements that are specific to the Sun Blade
T6300 server module.
TABLE 1-1 Sun Blade T6300 Server Module Environmental Requirements
Condition Requirement
Operating temperature 5˚C to 35˚C noncondensing
Nonoperating temperature -40˚C to 65˚C
Operating humidity 10% to 90% noncondensing (27˚C max. wet bulb)
Nonoperating humidity 93% noncondensing (38˚ C max. wet bulb)
Operating altitude 3000 meters at 35˚C
Nonoperating altitude 12,000 meters