Filter
Top Products
##### TEST MODE - NO CHANGES WERE MADE TO YOUR SYSTEM #####
#### All configuration files placed in /var/tmp/SAMFSTEST ####
System Configuration is Complete.
The system is ready to use. For information on managing
SAM and SAMBA please consult the README file
Hit Return to Exit Script.
Resetting a Configured Sun Fire X4500 Server
WARNING!: This procedure destroys your data.
To reset a Sun Fire X4500 Server so that you can run the x4500samconfig script, use the following procedure.
1. Unmount all SAM file systems.
2. Stop SAM processes.
3. Remove /etc/vfstab entries for any SAM file systems.
4. Destroy all ZFS pools and ZFS file systems.
5. Make copies of the following files:
/etc/sfw/smb.conf
/etc/opt/SUNWsamfs/archiver.cmd
/etc/opt/SUNWsamfs/diskvols.conf
/etc/opt/SUNWsamfs/mcf
/etc/opt/SUNWsamfs/releaser.cmd
/etc/opt/SUNWsamfs/samfs.cmd
/etc/opt/SUNWsamfs/stager.cmd
6. Remove the original files.
You can now run the x4500samconfig script.
Configuring the Sun Fire X4500 Server as Network Attached Archival Storage for Symantec Enterprise Vault 17