Filter
Top Products
Chapter 7: BIOS
7-13
I/O Device Confi guration
Access the submenu to make changes to the following settings.
KBC Clock input
This setting allows you to set the clock frequency for the Keyboard Clock. The
options are 8MHz, 12 MHz and 16MHz.
Onboard COM1
This setting allows you to assign control of Onboard COM1. The options are
Enabled (user defi ned), Disabled, and Auto (BIOS- or OS- controlled).
Base I/O Address
Select the base I/O address for COM1. The options are 3F8/IRQ4, 2F8/IRQ3,
3E8/IRQ4 and 2E8/IRQ3.
Onboard COM2
This setting allows you to assign control of Onboard COM2. The options are
Enabled (user defi ned), Disabled, and Auto (BIOS- or OS- controlled).
Base I/O Address
Select the base I/O address for COM2. The options are 3F8/IRQ4, 2F8/IRQ3,
3E8/IRQ4 and 2E8/IRQ3.
Floppy Disk Controller
This setting allows you to assign control of the fl oppy disk controller. The options
are Enabled (user defi ned), Disabled, and Auto (BIOS and OS controlled).
DMI Event Logging
Access the submenu to make changes to the following settings.
Event Log Validity
This is a display to inform you of the event log validity. It is not a setting.
Event Log Capacity
This is a display to inform you of the event log capacity. It is not a setting.
View DMI Event Log
Highlight this item and press <Enter> to view the contents of the event log.