Filter
Top Products
6-6
Add-on Card User's Guide
Figure 6-3: First Guided Conguration Screen
Follow these steps to create a new storage configuration in Guided Configuration
mode:
1. Select a redundancy option at the top of the Guided Configuration window:
– Redundancy Only: Create a configuration only if redundancy (RAID 1) is pos
-
sible.
– Redundancy when possible: Create a redundant configuration if possible. Other
-
wise, create a non-redundant configuration.
– No Redundancy: Create a non-redundant configuration.
2. Choose whether you want to use existing arrays in the new virtual disk. The
options are:
– Use Existing Arrays Only
– Don’t Use Existing Arrays
– Use Existing and New Arrays
The first and third options are disabled if there are no available existing arrays.