Filter
Top Products
2
LS1900 Series
2. Connect the other end of the interface cable to the
host.
3. Connect the power supply to the cable (if neces-
sary).
4. Scan the appropriate bar code(s) beginning on
page 33 to communicate with the host.
Removing the Interface Cable
Unplug the installed cable’s modular connector by
depressing the connector clip with the tip of a screwdriver.
Aiming
Note: The scanner performs best when it is not ex-
actly perpendicular to the bar code.
Scanning In Hand-Held Mode
1. Ensure all connections are secure.
2. Aim the scanner at the bar code. (If your scanner
has a trigger, aim the scanner and press the trigger.)
3. Ensure the scan line crosses every bar and space
of the symbol.
4. Upon successful decode, the scanner beeps and
the LED turns green.
6
6
4
012345 012345
RIGHT
WRONG
eng.fm Page 2 Friday, June 1, 2001 11:20 AM