Filter
Top Products
Rear View
DC in LAN USB Fan
RESET
Article Name Location Description
Power Button Front Panel The Power Button is used to turn Synology Server
On or Off.
To turn Off Synology Server, press the Power Button
until you hear a "beep" and the Power LED begins
blinking. The shutdown process will complete in 30
seconds.
LED
indicators
Front Panel The LED indicator is used to display the status of
the internal disk and the system.
USB Port Back Panel Synology Server offers 2 USB ports for adding
additional external hard drives, USB printers, or
other USB devices.
Fan
Ventilation
Back Panel The fan is to exhaust waste heat out of Synology
Server. It will start automatically when the server
starts. If the fan is malfunctioning, system will "beep"
every 1 second.
RESET
Button
Back Panel 3. To restore IP, DNS, passwords for the "admin"
account to default value, and reset the “guest”
account to the “enabled” status. (Please refer
to “Resetting Administrator Password”
chapter.)
4. To reinstall the Synology Server. (Please refer
to “Reinstalling Synology Server” chapter.)
LAN Port Back Panel The LAN port is where you connect RJ-45 cable to
Synology Server.
DC IN Port Back Panel The DC IN Port is where you connect the AC Power
Adapter.
15