Filter
Top Products
Chapter 3
SV-2003-X2 Server
Part Number: 1006446 Page 60 of 72
Version 1.0. 10/30/07
3. Loosen the thumb screws on the desired
module to be replaced.
4. Depress the module safety latch and gently pull
the handle as shown in Figure 4-12.
Figure 5-51 Hot-Swap of 2U Server Power Supply Module
5. Slide the replacement module into the power
supply.
6. Press firmly and evenly on the power module
until you feel the module seat in the back of the
power supply.
5.6 Replacing a Hot-Swap Hard Drive
The system's hard drive Hot-Swap feature
enables you to remove a hard drive without
shutting down the operating system or turning
off the system power. The way in which you
remove a hard drive depends on the
application you are using and whether you are
replacing a drive, adding a new one, or
removing a drive permanently.