Filter
Top Products
3–42 Operator Manual
Ser/Par Style
This parameter allows you to select the font style used by emulations attached to
the Parallel, Serial, and LAN port. For emulations that support downloaded
fonts, you can use this parameter to select the download font. The default
option selection is DP.
Style options
Draft (High-speed)
DP (Data Processing, Default selection)
Gothic (Sans Serif NLQ)
Courier (Serif NLQ)
OCR-A (Optical Character Recognition)
OCR-B (Optical Character Recognition)
Download (Selects the downloaded font)
CPI (Characters Per Inch)
This parameter allows you to select characters per inch (CPI) settings. The
possible options are 5, 6, 6.67, 7.5, 8.33, 8.57, 10, 12, 13.33, 15, 16.67, 17.14, and
20. The default is 10 CPI.
Panel Language
This parameter allows you to set up the printer to display messages on the
Control Panel in a particular language. Printed reports also display in your
chosen language. The possible options are English (default), German, French,
Italian, Swedish/Finish, and Spanish.
OCR Standards
This parameter defines the combination of ANSI and DIN standards to be used
for the OCR-A and OCR-B character sets. The default value is dependent on
the emulation. The possible selections are:
A: ANSI B:ANSI This means ANSI OCR-A and ANSI OCR-B
A: DIN B:ANSI This means DIN OCR-A and ANSI OCR-B
A: ANSI B:DIN This means ANSI OCR-A and DIN OCR-B
A: DIN B:DIN This means DIN OCR-A and DIN OCR-B
Zero
As an aid in distinguishing zeros from the uppercase letter O, you can choose to
have your zeros slashed (Ø). The default parameter option is open (non-
slashed) zeros.
Compressed 8
This parameter is either ON or OFF. Choosing ON causes all the characters
themselves that are printed at 8 LPI and above to be compressed vertically. The
result is increased white space between lines of print without changing the
current LPI setting. Compressed 8 works for any CPI setting. The default
selection parameter is OFF.
Operator Menu
⇒
Font